While I am definitely a crafty person, I don't think I would have guessed how much joy I get out of making things for my son and then see him enjoying the work and effort I put into them. I'm not saying I have made everything under the sun for him, just a few things here and there and I think I am most impressed that my ideas for him work out. I never said I would be humble with this blog, I definitely have the urge to share with anyone and everyone when I succeed. I will try to balance things with a few failures here and there, because, let's face it, parenthood is generally mom and dad just winging it!
Okay, this is a little whim of an idea I had for a toy for Henry.
Fabric Blocks
The moment Henry could lift his arm while on his tummy his absolute favorite "task" was to knock down anything stacked. We call this "crashing" and it is still his favorite thing to do. You can stack something in the living room and if he sees it from the dining room or kitchen he beelines it to the stack to crash it down.
While I know he isn't quite at the age to build grand architecture with shaped wooden blocks, I did think blocks in one form or another would be a good idea. I had some leftover 2 inch foam from an upholstery project I did last year and a bunch of baby boy themed fabrics in my fabric stash so I decided to wing it and make some fabric blocks.
Supplies Needed for 2"x2" Blocks
- Sheet of 2" foam (the size of the sheet depends on how many you want to make)
- Assorted fabric cut into 2.5" squares (six squares per block)
- Matching thread
- Sewing machine
- Regular hand sewing needle
The first thing I did in this process was cutting the foam into blocks. Since the foam I had was 2 inches thick I just made 2 inch by 2 inch cubes by drawing a grid on one side of the foam with lines that were 2 inches a apart. When cutting foam it is best to use a serrated knife, or if you have one, I have heard that the magic to even foam cutting is an electric knife. I cut mine quickly with a serrated knife so they are not all uniformly square but I think Henry will let that slide!
After all the foam was cut I knew how many fabric squares I needed, I cut out 15 cubes and so I needed 90 fabric squares (15 cubes x 6 sides = 90 sides). I cut my fabric into 2.5" strips and then cut the strips every 2.5" to make 2.5"x2.5" squares (the extra half an inch allows for a ¼ inch seam allowance when piecing the squares together).
Once the squares are all cut they are ready to be sewn together. Each block requires 6 fabric squares and if you have ever made a cube out of paper, piecing the 6 squares together should make sense. Lay out the six squares in a cross pattern:
Once you know what fabrics you want where, start sewing them, right sides (patterned side) together, using a ¼" seam allowance. IMPORTANT: leave ¼" unsewn at the start and finish of each seam. This will allow you to sew all sides into a cube shape.
I started with the long line of four squares and then sewed on the two side wings. To make it easier to sew on the the wings, I folded the fabric (as seen in the photo), that way I only sewed two fabrics together, not three.
Once the cross shape is sewn together, iron the seams flat in one direction. After ironing, the side seams can be sewn, again leaving a ¼" space at the beginning and end of each seam.
Now all that should be left to sew with the machine is the top flap, make sure that you leave one side of the flap open so you can pull the whole cube right-side-out and then put the foam in. Again sew leaving ¼" space at the start and finish of the seam.
Now the cube can be turned right-side-out. If needed, a crochet hook can be used to make the corners more pointy, but be careful since seams at the corners probably never met and the hook might poke through.
Now the foam can be inserted (you could also use batting) by squeezing it into a tiny cube then shoving it into the fabric cube via the hole in the top. I used my fingers and a crochet hook to smooth out the foam once it was inside the fabric.
The final step is closing the opening on the top of the block. I tried to close one block with the machine but I wasn't a fan of the end result...
So instead I decided to hand sew the openings closed, and while I know there is a way to make the stitches invisible, I was lazy and decided I kind of liked the homemade look to my wonky stitches :)
And that's it! They definitely are not uniform but Henry seems to like them and he loves to knock them over, so I am one happy mommy!





























They turned out great. A wonderful toy for the young child. So many of our children's playthings can be homemade if we pay attention to their developmental stages and the resources around us.
ReplyDelete